Close

Login

Please login with your username and password.

Login

Can’t remember your accounts password?

Can't access your account?

Please select your language

This page is available in the following languages:

    Please select your country

    ​​​​​​​​Finestop VB​

    Finestop VB is a one-component fluid-applied vapor impermeable air/water-resistive barrier. Waterproof and resilient, it may be spray-, roller-, trowel-, or brush-applied directly to approved wall substrates. It provides excellent secondary moisture protection behind most wall claddings including EIFS, stucco (slip sheet required), brick, siding and metal panels.

    FEATURES
    ​BENEFITS
    ​Meets ICC-ES AC212 water-resistive barrier tests
    ​One fully qualified air/water-resistive barrier material for the entire building
    ​Meets requirements of ICC-ES AC 148
    ​Can be used as a flexible flashing in rough openings or through-wall penetrations
    ​Meets ASTM D 1970 Nail Sealability Requirements
    ​Self-sealing
    ​Approved for Finestone Wall Systems
    ​Full system warranty with Finestone EIFS and stucco wall claddings
    ​Liquid-applied, continuously-bonded membrane; eliminates seams, lap joints and staples
    ​Transfers wind loads directly to the substrate
    ​One component, water-based, very low VOC content
    ​Safe for workers and the environment, low odor, easy application
    ​Nonflammable as applied
    ​Promotes workplace safety
    Compatible with lightweight, low-cost spray equipment
    ​Fast, easy economical application
    ​No primer required
    ​Single pass application on most substrates


    Uses

    For use over the following exterior wall substrates:

    Poured concrete/unit masonry, ASTM C1177 type sheathings, including:
        • DensGlassTM and DensElementTM exterior sheathing
        • eXPTM sheathing, GlasRoc® sheathing
        • SecurockTM glass-mat sheathing
        • Weather DefenseTM Platinum sheathing
        • GreenGlass® sheathing
        • PermaBaseTM cement-board by National Gypsum and other cement-boards (ASTM C1325 Type A Exterior)
        • Untreated Exposure I or exterior plywood sheathing (grade C-D or better)
        • Untreated Exposure I OSB, gypsum sheathing (ASTM C79/ASTM C1396)​
    ​​Do not use Finestop VB for below-grade applications or on surfaces subject to water immersion.