​​​​​​​​​​​​​​​​​​​​​​​​​​​Technical Bulletins

Air/Water-Resistive Barriers

• Acceptable Sealants for use with Finestop RA/RS/VB
• Air/Water-Resistive Barrier Application Guidelines
• Fastener Self-Sealing for Finestop Air/Water- Resistive Barriers Technical Bulletin
• Spray Application of Finestop RA/RS/VB
  

EIFS

• Acceptable Sealants to use with Finestone Wall Systems Technical Bulletin
• Application of Pebbletex CI-DCA in Elevated Temperatures​
• ​Code Compliance of Finestone Pebbletex Classic PB, Secondary Weather Barrier and Pebbletex D EIFS
• Guidelines for Inspecting EIFS Clad Homes
• The Importance of Using the Proper Notched Trowel
• Neopor GPS Plus Rigid Insulation Board and for use with Platinum CI EIFS​
• Pebbletex D, D7 & D10 Systems Methods of Attachment
• Platinum CI Neopor GPS Plus Supplementary Fasteners
  

Best Practices

• ​​​​Application of Textured Acrylic Finishes in Indoor Pool and Spa Areas
• Coatings Spray Equipment Recommendations​
• Cool Weather Application of EIFS, Stucco, and Acrylic Surfacing Systems Technical Bulletin
• Critical Light and Tips to Minimize Aesthetic Irregularities
• Maintenance, Cleaning and Repair Guidelines for Finestone Wall Systems and Finish​
• Prevention and Treatment of Efflorescence​
• Simple Method for Testing Bond over Painted Surfaces
• Tenting and Inclement Weather Application
• Tips for Optimizing Performance Sealant Joints within Master Builders Solutions Wall Systems​

Masonry Veneer Systems

• Insulated Masonry Veneer System Test Study on Seismic and Racking Performance
• Insulated Masonry Veneer System Test Study on Short-Term Deflection and Performance
• Masonry Veneer Systems Mortar - Types, Definitions and Uses
• Masonry Veneer Systems - Efflorescence
• Pebbletex CI-DCA with MaxGrip Veneer Mortar System Testing
• Resurfacing EIFS with Adhered Masonry Veneer​

​Stucco

• Master Builders Solutions and SPEC MIX Stucco System Program
• Accepted Stucco Wall Systems Lath and Trim Accessories
• Finescreen 500 & 1000 Trim Accessories​
  

​Platinum CI Stucco

• ​Guidelines for Attaching to Wood or Steel Framed Assemblies
• Platinum CI Stucco Non Combustible Construction
• Platinum CI Stucco Systems Key Detail Considerations​
  

​EIFS Resurfacing

• reFINE EIFS Procedures
• ​Procedure for Cleaning EIFS
• Procedure for Removing Efflorescence
  
• Procedure for Recoating EIFS
• Procedure for Reapplying Textured Finishes
• Procedure for Repairing Cracks in EIFS
• Procedure for Repairing Cracks in Aesthetic Joints in EIFS
• Procedure for Repairing Hail and Puncture Damage in EIFS
• Procedure for Reattachment of EIFS
• Procedure for Replacement of Sealant Joints in EIFS
• Procedure for Installation of an Overlay Sealant Joint
• Procedure for Resurfacing EIFS
• Procedure for Recladding Existing Structures​

​Stucco Resurfacing

• reFINE Stucco Procedures
• Procedure for Cleaning Stucco
• Procedure for Removing Efflorescence
• Procedure for Recoating Stucco
• Procedure for Reapplying Textured Finishes
• Procedure for Repairing Blistered Acrylic Stucco Finish
• Procedure for Patching Cracked Stucco
• Procedure for Repairing Stucco Cracks
• Procedure for Resurfacing Stucco​
  

Restoration & Reclad

• Basics of Conducting Adhesion Testing
• Technical Solutions for the Renovation of Brick and Masonry​
  

Special Interest

• Application of Finishes over Acceptable Substrates
• Application of Metallic Surfacing Systems' Guidelines
  
• Guideline Procedures for Coatings Mock-ups​
  
• Wash Off of Uncured Coatings and Finishes
• Warranty Issuance Instructions​